China Wooden Toys Manufacturers Introduces The Production Process Of Small Wooden Crafts

China Wooden Toys Manufacturers introduces the production process of small wooden crafts:

1. Select materials and draw sketches: select the required boards, the size is appropriate, there is room for tenon joints, and the surface should be flat and smooth. If it is necessary to widen the seam, it must be bonded tightly before it can be used. Put the drawn pattern on the wooden board, and align the left, right, up, and down. If there are defects in the wood, such as knots and cavities, try to avoid the carved parts and keep them in the carved parts.

point. The pattern is usually placed on the finished wooden board and then printed on the wood with multi-writing paper. It is also possible to draw the outline first to make a rough blank, and then follow the drawing and carving. the

2. Making rough blanks: After printing the drawings on wooden boards, use tools such as saws, planers, and shovels to first trim out the rough outlines to form rough blanks. the

3. Saw the outline: if it is an openwork pattern, you should first use a wood drill to drill the hole, penetrate the wire saw, and then chisel after sawing the outline. the

4. Chiseling: During the chiseling process, the round shovel is generally hit with a mallet to chisel out fixed curves and contours, and the largest part is dug out. the

5. Shoveling: The fixed curve is chiseled out, and the contour line is sawed out to be shoveled. Flat shoveling requires the surface of the shoveled wood to leave traces and keep it smooth and smooth. Because the petals, moiré, and fretwork cut by the shovel should be shoveled out layer by layer according to the size of the backhoe. Hollow penetrating carving should use a back shovel or round shovel with a tilted head for shovel carving, and the carving must be prevented from being damaged during the process. the

6. Carving: Carve outlines, finely carved with flat shovels and round shovels of different widths, patterns on flowers and leaves, clothing decorations, animal body patterns, dragon beards of faucets, and special tools such as fat beards. Sculpture.